High Performance Marine Reverse Osmosis Fresh Water filter of
Seawater Desalination
Application
In reverse osmosis (RO) seawater is forced at high pressure (to
overcome the osmotic pressure) through a semi-permeable membrane.
The membrane works like a filter, only allowing certain atoms and molecules through. The
process makes it possible to separate the water from the dissolved
materials. The membrane filter retains solids, bacteria, viruses,
lime and, for instance, heavy metals.
It solves the problem of drinking water in area of water shortage.
Features
- Flexible designs for multi-purpose applications, including
merchant ships, navy warships, engineering barge, offshore
platform, island water station &onshore facilities
- engineering barges, offshore platforms.
- Real-time indications via mimic diagram.
- fully automatic control by PLC integrated in one push button
- Regular chemical dosing & back flushing to ensure the unit always
working in good condition
- High standard R.O. Elements reducing operation/maintenance cost
- World-wide aft-sales service and maintenance upon request
-Automatic cleaning and fore & back flushing system with compressed
air acceleration of sand filter.
Performance system function of RO Seawater Desalination Plant
1) Sea water 35000ppm, for desalinating sea water into fresh water
500ppm
2) Whole system under control and monitoring via PLC
3) Automatic cleaning and back-flushing system equipped for sand
filter,
4) There is over-pressure protection available for high pressure
pump, when pressure is over 6.8Mpa, the system will shut down
automatically, and give alarm for attention.
5) High pressure pump equipped with low-pressure protection device,
when pre-treated sea water pressure is less than 0.05Mpa, the
system will shut down automatically and give alarm for attention.
6) Working parameter (Raw water flow, product flow, brine flow,
operation pressure, product water conductivity)
7) If the product water is unqualified (salt content more than
700ppm), the system will drain automatically and give alarm for
attention.
8) Potential-free alarm and running indication available for
extension.
Model | Capacity |
| GRRO-5 | 5 ton/day |
| GRRO-10 | 10 ton/day |
| GRRO-25 | 25 ton/day |
| GRRO-50 | 50 ton/day |
| GRRO-100 | 100 ton/day |
| GRRO-1000 | 1000 ton/day |
| GRRO-10000 | 10000 ton/day |
Product | 100m3/day |
| Raw water TDS | ≤35000PPM |
| Inlet temperature | 5~35°C |
| PH value of Raw W | 3.0~10.0 |
| Boosting inlet pressure | 0.1~1kg/cm2 (Positive) |
| Salt content of product water | ≤500PPM |
| Desalination rate | ≥98.5% |
| Product water pressure | ≤0.3Mpa |
| Recovery | ≈42% |
| Power supply | 220v/ 380v/ 440v 50//60HZ |
| Power consumption | ≈2.8KW(Include boost pump) |
| Control cabinet | 220VAC |
| Control voltage | 220VAC |
| IP | IP55 |
| Insulation class | F |
