15 ppm Bilge Alarm/Bilge alarm for marine bilge water separator for
sale
Meet IMO MEPC 107(49) and CCS certificate
Technical Data of 15 ppm bilge alarm
Measure range:0-30ppm
Alarm Point:1-15 ppm adjustable
Accuracy: Better than 5mg/l
Power Supply:220VAC/110VAC ± 10%
Display:LCD display
Size (over all):360 mm W x 240 mm H x 105 mm D
Standard:IMO.Res.MEPC.107(49)
| Type | OCM-15 |
| Range: | 0 – 30 mg/l can exceed to 50mg/l |
| Accuracy | Better than 5mg/l |
| Linearity | better than 2 % |
| Display | LCD display |
| Power Supply: | 220VAC/110VAC ± 10% |
| Consumption: | 10 VA |
| Alarm Points: | 1-15ppm |
| Alarm Points works set: | 15ppm |
| Alarm 1 delay | 0-10 second. |
| Alarm 2 delay | 0-10 second |
| Alarm output | Two way relays output |
| Alarm relay output contact value | 5A, 250VAC |
| Alarm relay output feedback signal test | Two way working status contact testing |
| Alarm Indication: | Red LED's |
| Output Signal: | 4 - 20 mA, reversible Ri < 500 |
| Sample Water Pressure: | 0.01 -6 bar |
| Sample Flow: | approx. 0.2 - 4 l/min depend on pressure |
| Ambient Temperature: | 0 to + 55° C |
| Sample Water Temperature: | + 1 to + 80° C |
| Size (over all): | 360 mm W x 240 mm H x 105 mm D |
| Degree of Protection: | IP 45 |
| Weight: | 8kg |
| Pipe Connections: | R 1/4" Female |
Specificationof 15 ppm bilge alarm
IMO Standard 15ppm Bilge Alarm/Oil Content Meter has been designed
specifically for use in continuous monitoring ofoil in bilge water, 15 ppm alarm and control of discharge,
detection, memory and enquiry of alarm status. It is applicableto detect boiler condensate water. And it applies to oil and
chemical industries as well.The bilge water alarm device use the technology of near infrared
measurement, which can
display the detected result in real time. The unit is supplied with
2 worksadjusted alarms. Theset point (15ppm factory set) could be adjusted at any moment
through the panel. If an alarm setpoint is exceed, the alarms are visible at the front panel and theappropriate relays are switched,that can be achieved the movement control of overrun closedown or
the treatment of overrunrecycle, and the memory and enquiry of alarm record. Furthermore, a
4 - 20 mA (equal to 0 – 15ppm) effective signal output is available
for driving a recorder or external meter.
Featureof 15 ppm bilge alarm
(1)Applying the most advanced multi-band infrared measuring
technique and the micro-processing technology, fast response with
high-accuracy-measurement;
(2)The overall use of EMI suppression design to overcome the
environmental impact on equipment,and improve system stability and
equipment reliability;
(3)Real-time display of oil concentration and working state of the
system.
(4)Real-time recording of the alarm status and automatically store
data,historical data at any time to print;
(5)Measuring room to facilitate maintence and cleaning,simple
operation;
(6)With the monitoring of operation condition,automatic control
over discharge of sewage to function when equipment in
failure,maintence or replacement
(7)The 15 ppm Bilge Alarm type BilgMon 488 is approved and
certified in accordance with the latest IMO resolution MEPC107(49)
.
Thanks for your attention!
Any interest for 15 ppm Bilge Alarm/Bilge alarm for marine bilge
water separator for sale,please don't hesitate to contact me!
